|
|
|
Xuanhua Construction Machinery Co., Ltd
|
|
| |
|
|
|
|
|
|
 Click to enlarge image
|
 Model Number |
T165-2 |
It has characteristic of semi-rigid suspension , mechanical drive . The main clutch is hydraulic boosted. The articulated point of the implement cylinder is at both sides of the guard. With hydraulic pilot controlled , electric monitoring , good appearance.
MAIN SPECIFICATIONS:
Overall dimensions (L*W*H) : 5416*3297*3160 mm (straight)
5566*3726*3160 mm (angle )
Operation weight: 17.8t(straight);18.2t(angle ) Flywheel power: 121kW
Max. drawbar pull: 139.6 kN(straight); 142.7kN(angle)
(The efficient force depends on weight and ground surface adherence)
Ground pressure (at operating weight): 69KPa
Min. ground radium: 3.9 m Min. ground clearance: 352.5 mm
DIESEL ENGINE
Manufactured factory: WEIFANG DIESEL ENGINE CO.,LTD
Model: WD615T1-3B
Type: straight line, water-cooled, with four stroke, pressure boost and direct injection
Cylinders Number-bore diameter*travel distance: 6-126*130mm
Displacement: 9.726 L Rated RPM: 1800 r/min
Rated power: 130 kW Max. torque: 870 N.m/1200-1300 rpm
Fuel consumption (at rated working condition): 225 g/kW.h
oil consumption: 1.8 g/kW.h Admissible altitude: ≤4000m
Cooling method: closed circulation water cooled
Starting method: electrically starting at 24V pressure
Manufactured factory: SHANGHAI DIESEL ENGINE CO.,LTD
Model:G128ZG8 Type:straight line, water-cooled, with four stroke,
Cylinders Number-bore diameter*travel distance: 6-135x150mm
Displacement: 12.88 L Rated RPM: 1800 r/min
Rated power: 130 kW Max. Torque : 838 N.m/1260 rpm
Fuel consumption (rated working condition): 224 g/kW.h
oil consumption: 0.7 g/kW.h Admissible altitude: ≤4000m
Cooling method: closed circulation water cooled
Starting method: electrically starting at 24V pressure
MAIN CLUTCH AND TRANSMISSION: The flywheel clutch is constantly disengaged with muti-powder-metal discs, which is operted by hydraulically boosting,.The transmission is mechanical double levels controlled with constantly meshed helical gears, and coupling sleeve shift. It has five speeds FORWARS and four speeds REVERSE .
STEERING AND BRAKING:The steering clutch is tighten by pressured springs and separated hydraulically with oil-type, multi-powder-metal discs.The brakes are oil, two-direction floating band with mechanism foot pedals, hydraulic boosted. The steering and braking can be actuated in one control.
FINAL DRIVE:The final drives are double reduction with spur gear and segment sprocket, which are sealed by floating oil seal for easy service.
UNDERCARRIAGE SYSTEM:Inner and outer beam of track roller frame are rectangular section.Track roller , carrier roller, idler are mounted with long life well sealed Duo-cone floating ring well sealed Duo-cone floating ring seal.
TRACK ROLLER (each side):
Singe flange: 4 Double flange: 2 Carrier roller(each side): 2
Idler (each side): 1 Type of track: single grouser combined
Tension mode of track: hydraulic Pitch: 203mm
Number of shoes(each side):38 pieces Width of shoe: 500mm
Length of track on ground: 2570mm
Sealed and lubricated track :The pitch, numbers and width of track shoes are the same with the general track.
IMPLEMENT HYDRAULIC SYSTEM:It consists of two group gear pump ,pilot valve, main valve , cylinders, oil filter and lines.
Pump type:two group gear oil pump
Front pump: 190L/min Pilot pump :19L/min System pressure: 12MPa
SERVICE REFILL
Radiator and diesel engine water: 60
Lubricating system of diesel engine oil: 25(G128),20(WD615)
Flywheel house, main clutch oil:35 Transmission, bevel gear case Oil:95
Final drive(each side) Oil:24 Implement hydraulic system Oil: 80
Fuel tank Oil: 285
Idle track roller, carrier roller, front idler(each) Oil: 0.35
|
|
|
|
| |
|
|
|
Related Keywords:
Bookmark / Share this page