|
|
|
Xuanhua Construction Machinery Co., Ltd
|
|
| |
|
|
|
|
|
|
 Click to enlarge image
|
 Model Number |
T140-2 |
It has characteristic of semi-rigid suspension , mechanical drive . The main clutch is hydraulic boosted. The articulated point of the implement cylinder is at both sides of the guard., With hydraulic pilot controlled , electric monitoring , good appearance.
Overrall dimension(L*W*H): 4763*3297*3159 mm
Operation weight: 16.5t Horsepower: 103.0 kW
Max.drawbar pull: 138.5 kN Ground pressure: 65.0kPa
Min. turning radium: 3.9 m Min. ground clearance: 400mm Working efficiency within 40 meters:169m3/h Blade capacity: 4.5 m3
DIESEL ENGINE:
Manufacture: SHANGHAI DIESEL ENGINE CO., LTD
Model: D6114ZG5B
Type: Water-cooled , single row, vertical ,4-stroke-cycle, turbocharged, direct injection
Number of cylindersbore * stroke : 6-114*135 mm
Piston displacement: 8.27 L Rated rotation speed: 1800 r/min
Rated horsepower: 115 kW Oil consumption : rated horsepower
Fuel consumption: ≤220g/kW*h
Engine oil consumption: ≤0.4% Fuel consumption
Max. torque: 756 N.m/≤ 1260rpm Idle speed: 700+_25 r/min
Max. RPM.without load: ≤2088 r/min Altitude: 3000 m
MAIN CLUTCH: normally opened ,multi-plate, powder metallurgy friction plate and hydraulic booster control.
TRANSMISSION: normally meshed helical gear drive, coupling sleeve shift and two levers operation .The transmission has five forward speeds and four backward speeds .
Forward Backward
First speed 2.52 km/h First speed 3.53 km/h
Second speed 3.55 km/h Second speed 4.96 km/h
Third speed 5.68 km/h Third speed 7.94 km/h
Forth speed 7.53 km/h Forth speed 10.53 km/h
Fifth speed 10.61 km/h
STEERING CLUTCH: Multiple-disc oil powder metallurgy disc compressed by spring, hydraulic operated. Brake is oil two direction floating band brake operated by mechanical foot pedal.
Two stage gear deceleration ,Duo-cone floating seal ,combined carrier roller to facilitate service.Track roller , carrier roller, idler are mounted with long life well sealed Duo-cone floating ring seal.
Track roller (each side):
Singe flange: 4 Double flange: 2
Carrier roller(each side): 2 Idler (each side): 1
Type of track: single grouser combined Tension mode of track: hydraulic
Pitch: 203 mm Number of shoes(each side): 38 pieces
Width of shoe: 500 mm Length of track on ground : 2570 mm
HYDRAULIC SYSTEM OF THE IMPLEMENT
Pump model: Two group gears pump
Pump type: P5100 - F100NM 487 98 / P124 - G10YG
System flow: Main pump 180L/min Pilot pump 18L/min
System pressure: Main pump 12MPa Pilot pump 2.5MPa
Three group valves: For dozing , tilting , ripper
Implement cylinder - bore*travel 2- 100 * 1082 mm
Fill location: Capacity(L) Radiator and diesel engine water: 31.2
Lubricating system of diesel engine oil: 25
Flywheel house, main clutch: oil 35
Transmission , bevel gear case: oil 90 Final drive: oil 24
Implement hydraulic system: oil 85 Fuel tank : oil 245
Idler, track roller , carrier roller oil 0.35 each
MODEL OF BLADE: Tilting blade
Width: 3297 mm Height: 1170 mm Max.digging depth: 320 mm
Max. lifting height: 852 mm Tilting angle: 8.5 Blade capacity: 4.5 m3
RIPPER SPECIFICATIONS: Number of shank:3 Length: 1580 mm Width: 2020 mm Height: 1236 mm
Max. penetration: 550 mm Max. lifting height: 510 mm
|
|
|
|
| |
|
|
|
Related Keywords:
Bookmark / Share this page